20MM Pure PPR Raw Material Plastic PPR Pipe
PPR DOUBLE ELBOW WALL-PLATE
|Code||Description||SIZE mm||Weight (G/PC)||PC/CTN||Vol/ctn (CBM)|
|XHL701||Double Elbow Wall-plate||20*1/2F||126||60||0.029|
(1) High Temperature Resistance: the maximum sustained working
temperature is up to 70 Degrees Celsius, the maximum transient
temperature is up to 95 Degrees Celsius.
(2) Heat Preservation: low thermal conductivity which is only
1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty
or contaminated by bacterium.
(3) Corrosion Resistant: resist chemical matters or electron
(4) Lower Installation Costs: light weight and ease of installation
can reduce installation costs by as much as 50% over metal piping
(5) Higher Flow Capacity: smooth interior walls result in lower
pressure loss and higher volume than metal pipes.
(6) Long Life: more than 50 years under normal conditions.
(7) Recycled and Environment-friendly.
Xinghua PPR pipes & fittings and valves are suitable for:
- Hot & Cold water supply (Residential, Industrial & other
- Drinking water supply
- Water Purifying systems
- Air Distribution & Compressed air Systems
- Radiator, wall and floor heating systems
- Swimming pool facilities
- Solar water heaters pipe lines
Lighter than the traditional option of copper pipes allowing for
Complete Plastic System
Fusion welding ensures a homogenous all plastic system.
Potable Water Distribution
Full compliance with international standards makes pipes suitable
for use in carrying drinking water and other fluids for human
Condensation and heat dispersion is greatly reduced.
Elasticity and high insulation mean increased noise reduction.
Smooth internal surface allows high flow speeds of the transported
liquids and ensures no calcification or scaling even at high
Taste & Odor neutral
Does not affect the quality of liquids and water.
The elasticity and welded connections of our PPR pipes makes them
suitable for use in earthquake prone areas.
Normal life span of 50 years and more.
The pipes and injection moulded fittings are joined by fusion
welding, ensuring a homogeneous and leak proof plastic system.
Jointing can be done by socket fusion (thermo fusion/polyfusion)
and electro fusion.
Jointing by Polyfusion:
- Cut pipe square
- Make sure the pipe end is clean
- Heat pipe and fitting on the polyfusion device
- Insert the pipe end into the fitting to full depth and hold for
prescribed seconds. Ready!
Note: Detailed installation instructions and all the necessary
technical data are available.
DO'S AND DONOT'S
Q: What's your raw material?
A: We only use 100% PPR Virgin raw material, 58-3A grade brass for
Q: What is your MOQ?
A: Please see below list, different size has different MOQ and the
MOQ can be adjusted according to actual order QTY.
|MOQ||Pipe/M||Plastic Fittings/PC||Brass Fittings/PC|
Q: What about the delivery time ?
A: It is decided by your order Qty. In general, 15 days for one 20FT,
20 days for one 40HF.
And we have white stock for size 20-63mm ppr fittings, if stock can
meet your requirement, the goods can be shipped right now.
Q: Where is your nearest shipping port ?
A: Ningbo Port.
Q: What is your payment terms?
A: 30% deposit, balance against the copy of B/L or L/C at sight.
Q: Can we have sample ?
A: Yes, of course. Free sample with airfreight collect.
Q: Can we have our logo on proudcts and customized package?
A: Sure, but order QTY should over our MOQ.
Q: I want to buy RED pipe and fittings? Can you make?
A: Yes, We can make any color if you provide Pantone number or color
sample to us. And no matter what color you need, the price is SAME.
Q: Could you please send me your price list?
A: OK, please show us your contact information now.